- Model: GHO 10-82
- Rated Power Input: 710 W
- Planning Width: 82 mm
- Planning Depth: 0.3.0 mm
- Adjustable Chip Thickness: 0 – 1 mm
- Adjustable Rebating Depth: 0 – 9 mm
- No-load Speed: 16,500 rpm
- Length: 284 mm
- Height: 173 mm
- Weight: 2.5 kg
Why this tool?
- Switch-on lock for left-handers and right-handers
- 3 V-grooves for easy and flexible routing
The machine is intended for planing of firmly supported
wooden materials, such as beams and boards. It is also
suitable for beveling edges and rebating.
Product Description and Specifications
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire
and/or serious injury.
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
For safe and proper working, always keep the machine
and ventilation slots clean.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated
(corded) power tool or battery-operated (cordless)
Work area safety
- Keep work area clean and well lit. Cluttered or dark areas
- Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
- Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
- Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
- Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
- Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
- Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
- Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to a power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
- Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
- Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
Power tool use and care
- Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled by
the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
- Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
- Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
- Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
- Use the power tool, accessories, and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.